Zen

Translation

cryptonote::simple_wallet
English
Available options:
seed language
Set the wallet's seed language.
always-confirm-transfers <1|0>
Whether to confirm unsplit txes.
print-ring-members <1|0>
Whether to print detailed information about ring members during confirmation.
store-tx-info <1|0>
Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference.
default-ring-size <n>
Set the default ring size (obsolete).
auto-refresh <1|0>
Whether to automatically synchronize new blocks from the daemon.
refresh-type <full|optimize-coinbase|no-coinbase|default>
Set the wallet's refresh behaviour.
priority [0|1|2|3|4]
Set the fee to default/unimportant/normal/elevated/priority.
confirm-missing-payment-id <1|0> (obsolete)
ask-password <0|1|2 (or never|action|decrypt)>
action: ask the password before many actions such as transfer, etc
decrypt: same as action, but keeps the spend key encrypted in memory when not needed
unit <monero|millinero|micronero|nanonero|piconero>
Set the default monero (sub-)unit.
min-outputs-count [n]
Try to keep at least that many outputs of value at least min-outputs-value.
min-outputs-value [n]
Try to keep at least min-outputs-count outputs of at least that value.
merge-destinations <1|0>
Whether to merge multiple payments to the same destination address.
confirm-backlog <1|0>
Whether to warn if there is transaction backlog.
confirm-backlog-threshold [n]
Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks.
confirm-export-overwrite <1|0>
Whether to warn if the file to be exported already exists.
refresh-from-block-height [n]
Set the height before which to ignore blocks.
auto-low-priority <1|0>
Whether to automatically use the low priority fee level when it's safe to do so.
segregate-pre-fork-outputs <1|0>
Set this if you intend to spend outputs on both Monero AND a key reusing fork.
key-reuse-mitigation2 <1|0>
Set this if you are not sure whether you will spend on a key reusing Monero fork later.
subaddress-lookahead <major>:<minor>
Set the lookahead sizes for the subaddress hash table.
segregation-height <n>
Set to the height of a key reusing fork you want to use, 0 to use default.
ignore-fractional-outputs <1|0>
Whether to ignore fractional outputs that result in net loss when spending due to fee.
ignore-outputs-above <amount>
Ignore outputs of amount above this threshold when spending. Value 0 is translated to the maximum value (18 million) which disables this filter.
ignore-outputs-below <amount>
Ignore outputs of amount below this threshold when spending.
track-uses <1|0>
Whether to keep track of owned outputs uses.
setup-background-mining <1|0>
Whether to enable background mining. Set this to support the network and to get a chance to receive new monero.
device-name <device_name[:device_spec]>
Device name for hardware wallet.
export-format <"binary"|"ascii">
Save all exported files as binary (cannot be copied and pasted) or ascii (can be).
persistent-rpc-client-id <1|0>
Whether to keep using the same client id for RPC payment over wallet restarts.
auto-mine-for-rpc-payment-threshold <float>
Whether to automatically start mining for RPC payment if the daemon requires it.
credits-target <unsigned int>
The RPC payment credits balance to target (0 for default).
inactivity-lock-timeout <unsigned int>
How many seconds to wait before locking the wallet (0 to disable).
0/35250 · 3525
Key English German Actions
cryptonote::simple_wallet
Send all unlocked balance to an address and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" or "index=all" is specified, the wallet sweeps outputs received by those or all address indices, respectively. If omitted, the wallet randomly chooses an address index to be used. <priority> is the priority of the sweep. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability.
 
cryptonote::simple_wallet
Send all unlocked balance to an address. If the parameter "index=<N1>[,<N2>,...]" or "index=all" is specified, the wallet sweeps outputs received by those or all address indices, respectively. If omitted, the wallet randomly chooses an address index to be used. If the parameter "outputs=<N>" is specified and N > 0, wallet splits the transaction into N even outputs.
 
cryptonote::simple_wallet
Send all unlocked balance from a given account to an address. If the parameter "index=<N1>[,<N2>,...]" or "index=all" is specified, the wallet sweeps outputs received by those or all address indices, respectively. If omitted, the wallet randomly chooses an address index to be used. If the parameter "outputs=<N>" is specified and N > 0, wallet splits the transaction into N even outputs.
 
cryptonote::simple_wallet
Sign a transaction from a file. If the parameter "export_raw" is specified, transaction raw hex data suitable for the daemon RPC /sendrawtransaction is exported.
Use the parameter <filename> to specify the file to read from. If not specified, the default "unsigned_monero_tx" will be used.
 
cryptonote::simple_wallet
If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the wallet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "mnew" is specified, the wallet creates as many new addresses as specified by the argument; the default label is set for the new addresses. If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. If "one-off" is specified, the address for the specified index is generated and displayed, and remembered by the wallet
 
cryptonote::simple_wallet
Available options:
seed language
Set the wallet's seed language.
always-confirm-transfers <1|0>
Whether to confirm unsplit txes.
print-ring-members <1|0>
Whether to print detailed information about ring members during confirmation.
store-tx-info <1|0>
Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference.
default-ring-size <n>
Set the default ring size (obsolete).
auto-refresh <1|0>
Whether to automatically synchronize new blocks from the daemon.
refresh-type <full|optimize-coinbase|no-coinbase|default>
Set the wallet's refresh behaviour.
priority [0|1|2|3|4]
Set the fee to default/unimportant/normal/elevated/priority.
confirm-missing-payment-id <1|0> (obsolete)
ask-password <0|1|2 (or never|action|decrypt)>
action: ask the password before many actions such as transfer, etc
decrypt: same as action, but keeps the spend key encrypted in memory when not needed
unit <monero|millinero|micronero|nanonero|piconero>
Set the default monero (sub-)unit.
min-outputs-count [n]
Try to keep at least that many outputs of value at least min-outputs-value.
min-outputs-value [n]
Try to keep at least min-outputs-count outputs of at least that value.
merge-destinations <1|0>
Whether to merge multiple payments to the same destination address.
confirm-backlog <1|0>
Whether to warn if there is transaction backlog.
confirm-backlog-threshold [n]
Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks.
confirm-export-overwrite <1|0>
Whether to warn if the file to be exported already exists.
refresh-from-block-height [n]
Set the height before which to ignore blocks.
auto-low-priority <1|0>
Whether to automatically use the low priority fee level when it's safe to do so.
segregate-pre-fork-outputs <1|0>
Set this if you intend to spend outputs on both Monero AND a key reusing fork.
key-reuse-mitigation2 <1|0>
Set this if you are not sure whether you will spend on a key reusing Monero fork later.
subaddress-lookahead <major>:<minor>
Set the lookahead sizes for the subaddress hash table.
segregation-height <n>
Set to the height of a key reusing fork you want to use, 0 to use default.
ignore-fractional-outputs <1|0>
Whether to ignore fractional outputs that result in net loss when spending due to fee.
ignore-outputs-above <amount>
Ignore outputs of amount above this threshold when spending. Value 0 is translated to the maximum value (18 million) which disables this filter.
ignore-outputs-below <amount>
Ignore outputs of amount below this threshold when spending.
track-uses <1|0>
Whether to keep track of owned outputs uses.
setup-background-mining <1|0>
Whether to enable background mining. Set this to support the network and to get a chance to receive new monero.
device-name <device_name[:device_spec]>
Device name for hardware wallet.
export-format <"binary"|"ascii">
Save all exported files as binary (cannot be copied and pasted) or ascii (can be).
persistent-rpc-client-id <1|0>
Whether to keep using the same client id for RPC payment over wallet restarts.
auto-mine-for-rpc-payment-threshold <float>
Whether to automatically start mining for RPC payment if the daemon requires it.
credits-target <unsigned int>
The RPC payment credits balance to target (0 for default).
inactivity-lock-timeout <unsigned int>
How many seconds to wait before locking the wallet (0 to disable).
 
cryptonote::simple_wallet
export_transfers [in|out|all|pending|failed|pool|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [output=<filepath>]
 
cryptonote::simple_wallet
Sign the contents of a file with the given subaddress (or the main address if not specified)
 
cryptonote::simple_wallet
Enter seed offset passphrase, empty if none
 
cryptonote::simple_wallet
wallet failed to connect to daemon, because it is set to offline mode
 
cryptonote::simple_wallet
Your wallet has been generated!
To start synchronizing with the daemon, use the "refresh" command.
Use the "help" command to see a simplified list of available commands.
Use "help all" command to see the list of all available commands.
Use "help <command>" to see a command's documentation.
Always use the "exit" command when closing monero-wallet-cli to save
your current session's state. Otherwise, you might need to synchronize
your wallet again (your wallet keys are NOT at risk in any case).
 

Loading…

No matching activity found.
Browse all string changes

Glossary

English German
amount Betrag Monero CLI & GUI
amount Betrag Getmonero
balance Guthaben Monero CLI & GUI
balance Guthaben Getmonero
daemon Hintergrunddienst Monero CLI & GUI
daemon Hintergrunddienst Getmonero
fee Gebühr Monero CLI & GUI
fee Gebühr Getmonero
fork Fork Monero CLI & GUI
fork Fork Getmonero
mine minen Monero CLI & GUI
mine minen Getmonero
mining Mining Monero CLI & GUI
mining Mining Getmonero
payment Zahlung Monero CLI & GUI
payment Zahlung Getmonero
payment ID Zahlungs-ID Monero CLI & GUI
payment ID Zahlungs-ID Getmonero
seed Seed Monero CLI & GUI
seed Seed Getmonero
spend key Spend-Key Monero CLI & GUI
spend key Spend-Key Getmonero
transaction Transaktion Monero CLI & GUI
transaction Transaktion Getmonero

String information

Key
cryptonote::simple_wallet
Flags
qt-format, qt-plural-format
Source string location
../src/simplewallet/simplewallet.cpp:3420
String age
2 years ago
Last updated
8 months ago
Source string age
2 years ago
Translation file
translations/monero_de.ts, string 862